Engine selection

Do not always choose the highest number of revolutions; a lower number of revolutions increases the maintenance intervals and the service life, and noise. In case of long-term operation of more than 1,500 service hours per year, the number of revolutions should not exceed 2,600 rpm.

Calculation of the required engine power

The power demand of the driven machine often cannot be determined exactly, therefore, allowance must be made for safety reserve capacities, as well as for altitude and ambient temperature, if they differ from the standard*.
(DIN ISO 3046-1, 100 m above sea level, +25°C, 30% relative humidity) (ISO 1585 / 1000 mbar, +25° C)